Road

Midnight Special is a road plus bike designed to provide comfort and speed on those all-day rides that extend well beyond fresh pavement. Midnight Special shines on pot-holed, deteriorating pavement and the occasional long stretch of gravel. Its 650B road plus tires eat up road chatter and absorb all the bumps in the road like the champion it was designed to be. When it comes to road bikes, we just want to toss a few bananas into our pockets and see where the road takes us. We seek out varied surfaces on our rides and frequently go from pavement to gravel to worse pavement. Midnight Special allows us to accomplish all of that quite comfortably. - Higher volume tires allow better fine tuning of tire pressure on varying surfaces and create a wider contact patch for increased traction - Modern road standards like flat-mount disc brakes, 12mm front and rear thru-axles, and a 44mm head tube - Clearance for 650B x 60mm or 700c x 42mm tires without fenders (650B x 50mm or 700c x 38mm with fenders)

A meticulously designed, beautifully-constructed track racer destined to take the modern fixed-gear rider beyond the velodrome. Built to be the track bike we'd always dreamed of owning, this competition-ready steel frame soaks up bumps and sprints like a champ. Boasting a single set of bottle bosses and bumped-up tire clearance, it's drilled for brakes and fully street legal. 612 Select Tubing - We've carefully chosen every piece of tubing on every frame size to provide the best ride possible. Drilled For Brakes - Drilled for front and rear brakes when quick and safe stopping is needed off the track. Tire Clearance - Run 25c tires on the track or swap 'em out for 32c tires when you're ready to hit the street. Lugged Fork Crown - Thoughtful custom touches add class and style—perhaps where you least expect it. Signature Seat Collar - Train your eyes on that timeless and tasteful brazed-on seat collar, elegantly designed around the All-City logo. Custom Dropouts - Signature stainless steel Hennepin Bridge track dropouts add grace and a dash of pride for AC's home turf. Reinforced Bottle Bosses - Beautiful stars reinforce the bottle bosses and our obsessive attention to detail. Liquid Paint and E.D. Coat - Our topnotch wet paint finish sparkles with depth and luster, while an E.D. coating protects against rust.

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 26 x 2.1" tires with or without fenders

Straggler is a bikepacking-inspired road/gravel bike mostly at home on pavement but ready for trail duty when called. Born on Gravel. Raised on Pavement Straggler is tuned for cross-over exploration on a wide variety of terrain conditions. It's a day-tripper and a weekender. It's a "rough road" road bike, a cyclocross bike with no pretense about racing, a utilitarian townie, a light-duty touring bike and an all-weather commuter. It's a steel gravel bicycle that thrives on the road. Think of it as a "mountain biker's road bike." If you only have room for one bike in your life, Straggler can (and should) be your one and only. Straggler's capabilities go well beyond asphalt. It also lends itself well to light touring setups. We're talking frame bags, seat bags, and "credit card touring" rather than full-blown touring. Straggler also handles our 8- and 24-Pack Racks well, so you have some heavier-duty loading options. - Accommodations for racks and fenders - Forward-exiting horizontal dropouts for singlespeed compatibility and wheelbase adjustability - Clearance for 700c x 41mm tires with fenders!

Bridge Club is a highly versatile touring bike that perfectly hits the sweet spot, spanning on- and off-road excursions. Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods. Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too! - Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist - Two build kit options: Pavement (700c) and Off-Road (27.5-inch) - Run racks and panniers, framebags, or all of the above - Disc brake-specific, single position, vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm tires (with or without fenders), 27.5 x 2.80 tires (27.5 x 2.60 with fenders), and 26 x 3.0 tires (26 x 2.80 with fenders)

Straggler is a bikepacking-inspired road/gravel bike mostly at home on pavement but ready for trail duty when called. Born on Gravel. Raised on Pavement Straggler is tuned for cross-over exploration on a wide variety of terrain conditions. It's a day-tripper and a weekender. It's a "rough road" road bike, a cyclocross bike with no pretense about racing, a utilitarian townie, a light-duty touring bike and an all-weather commuter. It's a steel gravel bicycle that thrives on the road. Think of it as a "mountain biker's road bike." If you only have room for one bike in your life, Straggler can (and should) be your one and only. Straggler's capabilities go well beyond asphalt. It also lends itself well to light touring setups. We're talking frame bags, seat bags, and "credit card touring" rather than full-blown touring. Straggler also handles our 8- and 24-Pack Racks well, so you have some heavier-duty loading options. - Accommodations for racks and fenders - Forward-exiting horizontal dropouts for singlespeed compatibility and wheelbase adjustability - Clearance for 650B x 41mm tires with fenders!

Steel Commuter and Gravel Bike Preamble is a hard-boiled steel commuter built for comfort, durability, and buffoonery on pavement and gravel. Nothing More is Needed. Nothing Less Will Do. The challenge was thus: Build a serious steel bike and give it only the attributes that matter most. Make it quick and comfortable on pavement, as well as confident and compliant on degraded surfaces. What the Enginerds put forth is Preamble, a pavement and gravel utility worker that proves you don't need to cut corners or clip coupons to make a more affordable steel bike. You just need to keep it simple. Preamble can run racks and fenders and carry a couple water bottles. Surly was raised on stealing basic cable, after all. Smooth and efficient on asphalt, Preamble's double-butted main triangle provides a resplendent ride feel and withstands abuse from life's inevitable potholes. Make it your own with flat bars, drop bars, a basket, or bags. On the road to steel euphoria, Preamble is the gateway drug. Let facts be submitted to a candid world: - Offered in flat-bar and drop-bar configurations - Easy T-Shirt sizing to fit nearly every rider (XS, S, M, L, XL) - Sloping top tubes on XS and Small frames for improved standover and comfort - To offer the best rider experience for every frame size, XS and S frames get 650b wheelsets while M–XL get 700c - Custom-cast single-position vertical dropout

A Cross Monster Built for Exploration Taking inspiration from our famed cross bikes, the Gorilla Monsoon will send you far into the unknown with comfort, style, and elegance. Do-It-All Dirt Solution A sweet beast designed to handle double track, gravel, bikecamping, and the pursuit of good times, this nimble, do-it-all dirt solution is ready to send cross racers, dirt tourists, and backcountry explorers on the ride of a lifetime. Mounts for Fenders and Racks in Front and Back Conquer wet roads, fully loaded bikepacking trips, and the gnarliest of grocery lists Tire Clearance Built around a 27.5 x 2.4" platform, the Gorilla Monsoon offers clearance for 700c x 42mm tires to deliver complete tire freedom 612 Select Tubing Selected specifically for sporty handling on the course, comfort on tours, and maximum fun on-road or off Dropper Seatpost Ready to rock steep descents on the trail or pavement Flat-mount brakes Flat-mount disc brakes offer clean aesthetics and compatibility with modern product standards

The Hakka MX is our answer to the Swiss Army Knife. Lightweight With its ultra versatile geometry and 1000g frame weight, the Hakka MX is just as happy crushing the local club ride as it is jumping barriers or camping out. Versatile It's good to have options. With the Hakka MX, you can run road, cross and gravel friendly 700c wheels, or if you are into burlier backcountry exploration, go with 27.5/650b. With the Hakka MX, you don’t have to pick one tire option or the other. Our subtle sculpted chainstays give the frame clearance for up to 700 x 40c or 27.5 x 2.1” tires. Cable Routing Options Galore No matter what drivetrain you prefer, 1x, electronic, or 2x, the Hakka MX has you covered. The frame has internal cable routing provisions for every drivetrain on the market, plus a dropper post. We’ve even included a slick Di2 battery mount inside the downtube. Bottom Bracket We’ve tried every bottom bracket under the sun and in the end, we haven’t found anything that’s more reliable than a threaded BB. Our Hakka features the T47 BB standard, which uses 30mm bearings enabling you to use the recent crop of lightweight cranksets. This is the best way to combine a threaded BB with 30mm spindle compatibility. It’s lightweight, quiet and durable, because no one likes a creaky bike. Disc Brakes & Fender Mounts The Hakka MX has flat-mount disc mounts and fits a 160mm rotor. The ENVE G Series Gravel fork has fender eyelets, internal cable routing and monster clearance for 700c x 50c or 27.5" x 2.25" tires. There’s also a removable rear fender mount on the seat stays. Two We offer two groups (Rival1 and Shimano GRX), two wheel sizes (700 or 27.5"), two color options (Salt Water Taffy or Sacre Bleu) and two rim material options (carbon or aluminum). Five The Hakka comes in five frame sizes: 49, 53, 55, 58, 61 Lifetime Warranty If its our fault, we'll fix it. Simple as that. *Specs may differ from images shown

A Cross Monster Built for Exploration Taking inspiration from our famed cross bikes, the Gorilla Monsoon will send you far into the unknown with comfort, style, and elegance. Do-It-All Dirt Solution A sweet beast designed to handle double track, gravel, bikecamping, and the pursuit of good times, this nimble, do-it-all dirt solution is ready to send cross racers, dirt tourists, and backcountry explorers on the ride of a lifetime. Mounts for Fenders and Racks in Front and Back Conquer wet roads, fully loaded bikepacking trips, and the gnarliest of grocery lists Tire Clearance Built around a 27.5 x 2.4" platform, the Gorilla Monsoon offers clearance for 700c x 42mm tires to deliver complete tire freedom 612 Select Tubing Selected specifically for sporty handling on the course, comfort on tours, and maximum fun on-road or off Dropper Seatpost Ready to rock steep descents on the trail or pavement Flat-mount brakes Flat-mount disc brakes offer clean aesthetics and compatibility with modern product standards

The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bikepacking. The stainless steel frame is strong, comfortable, and surprisingly light weight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.

The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. DESIGNED FOR BIKEPACKING Every last feature of Fenrir Ti is optimized for bikepacking. The titanium frame is strong, smooth, and lighter than steel. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir Ti is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.

The Otso Fenrir is a ride-anywhere bike for bike-packing races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while the extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. DESIGNED FOR BIKE-PACKING Every last feature of Fenrir Ti is optimized for bike-packing. The titanium frame is strong, smooth, and lighter than steel. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single-speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir Ti is ready. SINGLE SPEED All metal Otso bikes have the option to be built single-speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears but want to convert to single-speed later on, there is a single-speed Tuning Chip ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bike-packing bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet the demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.  

The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. DESIGNED FOR BIKEPACKING Every last feature of Fenrir Ti is optimized for bikepacking. The titanium frame is strong, smooth, and lighter than steel. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir Ti is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.

The Warakin Ti is an efficient, responsive, sprightly titanium bike that can handle any road in any weather. Using the progressive geometry of its Warakin Stainless predecessor, the Warakin Ti pairs unrivaled ride quality with the superior quality of titanium. It's a lightweight, durable, lively machine that will carry the rider to where they choose to go while enjoying every pedal stroke along the way. SUPERIOR TITANIUM The 3Al/2.5V B338 grade 9 titanium that we use for the Warakin Ti is the same titanium that has been a bicycle industry favorite for decades, and with good reason. Equal parts science and magic, titanium is durable, lightweight, lively, corrosion-resistant, and timeless. The tubing is seamless, butted, clean, and strong. It's because of the superior quality of titanium that we chose this material to lend to our heralded Warakin geometry as a bike that will endure the roughest roads in the harshest conditions and tell the stories for decades to come. EXTRA TIRE CLEARANCE If a bike is meant to ride any road in any condition, it needs to fit tires and wheels that will get you to and from your destination, while handling every bump along the way. The massive tire clearance of the Warakin Ti was built with this in mind. It'll fit 29" x 2.1" for that road that doesn't actually appear on the map, just as easily as 650b x 50mm for windy forest trails, or 700c x 35mm (or 700c x 50mm if you want a little extra) for your next gravel race. Because a frame that can last forever needs to have the ability to adapt to whatever the road (and the future) may bring. VERSATILITY Like all Otso bikes, the Warakin Ti sports our patented Tuning Chip rear dropout system, which allows the rider to lengthen or shorten the wheelbase by up to 20mm and raise or lower the bottom bracket by up to 4mm. For chunky gravel on remote roads, the longer wheelbase of the rear position is set for stability and comfort. For a quick spin around town or the CX course, the front position makes for snappy handling and agile control. The middle position? That's the best of both worlds. The Tuning Chip rear dropout system was designed because the bike should be just as versatile as its rider. TOP QUALITY Designed by the Otso engineering team, Warakin Ti frames are built by top fabricators in Taiwan and come with a five-year limited warranty. All bikes and frames are inspected and assembled at our headquarters in Minneapolis, MN USA. PROGRESSIVE GEOMETRY The progressive geometry of the Warakin Ti takes a page from the cross-country MTB playbook. Increased top tube length and a shorter stem maintain stack and reach while providing a lively ‘can-do’ attitude on rougher terrain. EXTRA MOUNTING OPTIONS Numerous braze-ons accommodate three bottles, fenders, racks, cable routing clamps, frame bags, and more. Mix in the Wolf Tooth B-RAD System to even further increase on-bike storage options. SUSPENSION-READY The geometry of the Warakin Ti includes an axle-to-crown measurement of 420mm, which allows for a shorter suspension fork.

The Waheela C is a carbon-framed drop bar bike with adjustable geometry, unrivaled ride quality, and enormous tire clearance for 700c x 54mm, 650b x 54mm, or 29" x 2.1" tires. It has extra frame and fork mounting points for bottles and racks, easily accessible internal cable routing options, compatibility for 1x or 2x electronic or mechanical drivetrains, and the ability to run a dropper post. No matter the road ahead (or under the tire), the Waheela C is ready. GIANT TIRE CLEARANCE Gravel comes in all shapes and sizes, from the packed limestone of Southeast Minnesota to the chunky roads of the Flint Hills of Kansas. The Waheela C is equipped with tire clearance to handle the terrain of your next race. Where most gravel bikes can fit 650b x 50mm but only 40mm with bigger wheels, the Waheela C keeps on rolling, with space for 700c x 54mm tires. It'll run 700c x 35mm when the roads are tacky and tidy, 700c x 42mm when there's a bit more uncertainty, 700c x 54mm when the gravel road turns to ATV trails, and anything in between. The Waheela C can also fit 29" x 2.1", 27.5" x 2.1", or 650b x 54mm if 700c isn't really your thing. In short, the Waheela C is ready for the road ahead. ADJUSTABLE GEOMETRY Like all Otso bikes, the Waheela C sports our patented Tuning Chip rear dropout system, which allows you to change the length of your wheelbase and the height of your bottom bracket. Put the Tuning Chip in the back position to get the stability and comfort of a longer wheelbase for a full day of riding gravel. Switch to the front position to get the agile handling and responsiveness required by your next CX race. And the middle position? That's the best of both worlds. The adjustable geometry of the Waheela C allows you to ride any road or any trail without needing to switch bikes. UNRIVALED RIDE QUALITY Our proprietary Waheela geometry was developed by our engineers for stability, confidence, and comfort on rough terrain. Where many gravel bikes put extra weight on the front wheel, the Waheela C centers the rider over both wheels. This makes for a more stable ride while allowing the compliant rear triangle to come into play and absorb the bumps of a gravel road. Meanwhile, the lightweight EPS molded carbon frame adds responsiveness and readiness for a sprint up that next hill. After a long day on the saddle, you'll find yourself adding a healthy amount of miles to tomorrow's ride. EXTRA MOUNTING POINTS Waheela C features fork bottle bosses, extra down tube mounting points (6 total), as well as top tube gas tank mounting points. Numerous braze-ons allow Waheela C to accommodate water bottles, fenders, racks, frame bags, and more. DETAILS THAT MATTER Internal brake and shifter routing with sleeves, carbon access door under the bottom bracket for easier routing, front and rear thru-axle, and threaded bottom bracket for reliable, easy service. This also allows you to run that dropper post you've been dreaming about. COMPATIBLE WITH 1X OR 2X Waheela C is 1x and 2x compatible with mechanical and electronic drivetrains. It's also fully compatible with both Shimano Di2 and SRAM eTap AXS, in case you don't want to take advantage of internal routing options. QUALITY ASSURED Designed by the Otso engineering team, Waheela C frames are manufactured in one of the premier carbon fiber factories in Taiwan and come with a 5-year limited warranty. All bikes are inspected and assembled at our headquarters in Minneapolis, MN USA.

The Warakin is a versatile steel all-road bike that will carry its rider to any destination. It is designed for multi-surface rides, overnighters, gravel races, and commuting. Frame features include adjustable geometry; lots of mounts for cargo, racks, and fenders; clearance for 50mm tires; suspension-corrected geometry to run a suspension fork; and can be built with gears or single speed. No matter your riding plans, the Warakin will meet your needs for the road ahead. THE COMFORT OF STEEL The Warakin frame is made of Otso custom-butted 4130 chromoly tubing. This steel has a classic, comfortable quality and pairs with the Warakin progressive geometry for a stable, smooth ride. 4130 chromoly is known to be durable and reliable, which makes it a strong option for light touring and afternoon rides alike. MULTI-SURFACE RIDING If you want one bike that can join afternoon group rides, gravel races, overnighters, and daily commutes, the Warakin is for you. The progressive geometry, generous tire clearance, cargo and rack mounts, and smooth steel frame allow the Warakin to adapt to many types of riding. This bike has been a favorite here at Otso HQ where a 20-mile ride could include 10 miles of pavement, eight miles of gravel, and two miles of flowy singletrack for good measure. ADJUSTABLE GEOMETRY The Tuning Chip rear dropout system allows the rider to lengthen or shorten the wheelbase by up to 20mm, raise or lower the bottom bracket by 4mm, and change the head tube angle by +/- 0.5º. For chunky gravel on remote roads, the longer wheelbase of the rear Tuning Chip position is set for stability and comfort. For a quick spin around town or the CX course, the front position makes for snappy handling and agile control. A middle position is also available, which covers the best of both worlds. TIRE CLEARANCE If a bike is meant to ride any road in any condition, it needs to fit tires and wheels that will get the rider to and from their destination while handling every bump along the way. The Warakin will fit 700c x 50mm tires for minimum maintenance roads, just as easily as 650b x 50mm for forest trails, 700c x 35mm for your next gravel ride, or anything in between.

We built the Thunderdome to celebrate the urban cycling and track-racing communities-the very heartbeat of All-City. Crafted from 7000 Series Aluminum, drilled for front and rear brakes, and now available as a complete bike for the very first time, this lightweight and responsive racer has proven itself on the boards of velodromes across the globe. Stripped down and race-ready, this scary-fast champ is ready to tear through left turns and track crits in record time. From distance to sprints, all this rocket asks is that you hold on tight. UCI Certified - Officially approved for full-on, heart-stopping track racing by the Union Cycliste Internationale, the world governing body for sports cycling. Drilled For Front and Rear Brakes - Race it brake-free in its natural habitat, or run front and rear brakes if you wanna take the Thunderdome to the streets. Round Profile Tubing - With a nod to classic styling and efficient performance, the Thunderdome boasts round profile tubing constructed from 7000 Series Aluminum. Carbon Fork - Outfitted with the lightweight Whisky No.7 RD Tapered carbon fork for high style and precise handling. Stainless Axle Pads - Replaceable stainless steel axle pads for increased durability. UID Paint and Polished Frame Accents - Our topnotch wet paint sparkles with depth and luster, contrasting with beautifully polished aluminum sections from the starting line to the photo finish. Classic Headtube With Modern Performance - Clean and stylish, a tapered headtube offers increased stiffness and improved cornering. Signature Seat Collar - Our fully custom Shot Collar seatpost clamp gets the job done with a little flair.

Straggler shares all of the Cross-Check's braze-ons for fenders, racks and bottle cages, and like the Cross-Check its ready to take you just about anywhere. It's a day tripper and a weekender. It's a 'rough road' road bike. It's a cyclocross bike with no pretense about racing. It's a utilitarian townie. It's a light-duty touring bike. It's an all-weather commuter. And when you get tired of one set up, you can swap parts around and turn it into something else. - Fender eyelets at the dropouts, front and rear rack bosses and dual water bottle mounts, downtube shifter mounts - 100% Surly proprietary 4130 chromoly tubing. TIG-welded, double-butted main triangle - Forward-exiting horizontal dropouts with adjusters give you singlespeed compatibility and wheelbase adjustability to help you fit the tires and fenders you want to run with that drivetrain you want to run. - Frame is ED Coated for increased life expectancy

Straggler shares all of the Cross-Check's braze-ons for fenders, racks, and bottle cages, and like the Cross-Check its ready to take you just about anywhere. It's a day tripper and a weekender. It's a 'rough road' road bike. It's a cyclocross bike with no pretense about racing. It's a utilitarian townie. It's a light-duty touring bike. It's an all-weather commuter. And when you get tired of one set up, you can swap parts around and turn it into something else. - Fender eyelets at the dropouts, front and rear rack bosses and dual water bottle mounts, downtube shifter mounts - 100% Surly proprietary 4130 chromoly tubing. TIG-welded, double-butted main triangle - Forward-exiting horizontal dropouts with adjusters give you singlespeed compatibility and wheelbase adjustability to help you fit the tires and fenders you want to run with that drivetrain you want to run. - Frame is ED Coated for increased life expectancy

The Zig Zag is All-City’s answer to what a Modern Endurance Steel Road Bike should be. Elegant and eye-catching, it’s a ripping-fast and efficient machine built to shield the rider from road chatter and unnecessary fatigue. Designed for speed, style, and maximum comfort, the Zig Zag allows riders to go further, faster, and have more fun. - A.C.E. Tubing — Our proprietary heat-treated, air-hardened, extruded steel tubing that we custom-designed for riding and racing - Whisky No.9 RD+ carbon fork - Whisky No.7 handlebar, stem and seatpost - A classic road silhouette blends with a contemporary road geo to balance power with comfort for long days in the saddle or attacks off the front - Clearance for 700c x 35mm tires without fenders; 700c x 32mm with fenders - Custom head badge, Signature dropouts, Signature brazed-on seat collar, pump peg, two bottle bosses, and hidden fender mounts

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. Additionally, the 700c platform now offers clearance for 47mm tires for greater flexibility in tire options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 700c x 47 tires with or without fenders

Bridge Club is a highly versatile touring bike that perfectly hits the sweet spot spanning on- and off-road excursions. Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods. Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too! - Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist - Two build kit options: Pavement (700c) and Off-Road (27.5-inch) - Run racks and panniers, framebags, or all of the above - Disc brake-specific, single position, vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm tires (with or without fenders), 27.5 x 2.80 tires (27.5 x 2.60 with fenders), and 26 x 3.0 tires (26 x 2.80 with fenders)

The Grappler is Surly’s dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it’s lively and responsive on single track, double track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, thru-axles front and rear provide ideal stiffness and handling. Built around 27.5” wheels and compatible with internally geared hub and single-speed setups, Surly’s tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly’s proprietary ’Natch tubing, double-butted main triangle, 1-1/8” headtube, non-suspension corrected - Horizontal-slotted dropout, Surly Gnot-Boost spacing - Seatstay-mounted bottle bosses, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing - E.D. coated frame for increased life expectancy - 27.5 x 2.8” tire clearance (with or without fenders)

The Otso Fenrir is a ride-anywhere bike for bike-packing races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while the extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bike-packing. The stainless steel frame is strong, comfortable, and surprisingly lightweight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single-speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single-speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears but want to convert to single-speed later on, there is a single-speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bike-packing bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet the demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.  

A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. Additionally, the 700c platform now offers clearance for 47mm tires for greater flexibility in tire options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 700c x 47 tires with or without fenders

The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bikepacking. The stainless steel frame is strong, comfortable, and surprisingly light weight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.

Your days of navigating airports and taxis with bulky and unruly bike boxes on your way to and from distant cycling destinations are a thing of the past. The legendary steel Road Logic Break-Away is back in the Ritchey stable! The bike that travels with you, the Road Logic Break-Away easily and quickly disassembles to fit into its own included sturdy travel case that is designed to help you avoid airline extra baggage fees. Once you arrive at your destination, the bike assembles with ease - allowing you to quickly get out and go. While the main feature of the Road Logic Break-Away is its liberating and innovative travel-friendly design, this unique version of the Road Logic frameset is 100% true to the spirit, spec, and ride quality of its standard frame sibling. The Road Logic Break-Away offers a riding experience that's steeped with more than fifty years of frame building heritage, innovation, and exploration. The beauty of its classic lines unites with modern building techniques and proven materials to deliver a contemporary bicycle that's wonderfully comfortable for long days in the saddle, nimble and stiff enough to win the sprint for that sign, and adequately adaptable to endure roads that might lack proper pavement – be it out your back door or in a different hemisphere. A modern classic by any measure, the Road Logic Break-Away is crafted with a heat-treated and triple-butted Ritchey Logic tubeset. This steel frameset features aggressively short-butted sections optimized for TIG welding that save weight and improve ride quality. Other features of the Road Logic Break-Away frameset include Ritchey’s proprietary forged-and-machined integrated head tube that uses standard drop-in bearings which saves 80 grams over a standard head tube design, spacing for up to 30c tires, and a Ritchey Carbon Fork for precise handling and plenty of tire clearance. The Road Logic Break-Away is sure to set you free to experience a lifetime of pedal turns - wherever you land and wherever they might lead you. - The bike that travels with you, the Road Logic Break-Away easily and quickly disassembles to fit into its own included sturdy travel case - TIG welded heat-treated, triple-butted Ritchey Logic steel tubing - Fits up to 30c tires - Ritchey WCS Carbon road fork and WCS headset included - Includes Break-Away travel case and padding along with a 4Nm Break-Away torque key

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)

The Midnight Special is an endurance road bike designed to provide comfort and speed on those all-day rides that extend well beyond fresh pavement. It excels on pot-holed, deteriorating pavement and the occasional long stretch of gravel. The Midnight Special’s 700c tires eat up road chatter and absorb all the bumps in the road for a much more comfortable ride. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and three sets of water bottle mounts - Flat-Mount disc brakes - 44mm head tube - Tire Clearance: 27.5 x 2.35" (w/o fenders), 700c x 42mm (w/o fenders), 650b x 50 (w/ fenders), 700c x 38mm (w/ fenders)