Tools & Tuning

Universally applicable ecological hot wax for amateur enthusiasts. - For all snow conditions and temperatures - Good sliding properties - Prevents the base from drying out - Biodegradable - Protects skis from dirt and oxidation when they are stored - Resealable wax case

This fine horse-hair brush is perfect for brushing even the finest structures.  Best for finishing cold waxes.

Soft base brush for polishing bases. The final touch before the start!  Great for finishing Top Finish products also.

This fine horse-hair brush is perfect for brushing even the finest structures.

Professional all-round brush for brushing all kinds of hot wax. Ideal for brushing ironed-in Jetstream.

Very soft special wax with low melting point. Ideal for base cleaning and use as basic care of new skis - Penetrates very deep into the base - Biodegradable - Resealable wax case - Base cleaning: Wax the base and remove again while the wax is still warm. Snow temperature recommendations: - Yellow 32F to 21F - Red 25F to 10F - Blue 14F to -22F

Liquid paraffin wax to meet the high demands of junior racing and for training sessions in all disciplines. No shipping to Alaska (please buy locally). - Yellow for warm conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f) - A good practice is to “aim cold” with these waxes. Blue is an excellent overall wax.

Special fleece for base cleaning and different types of polishing. It can also be used as a base-friendly fleece when ironing in hot wax and Jetstream. - 20m x 0.15 m

120g Base Performance Yellow/ Red/ and Blue/ a nylon brush/ and a 3mm plexiscraper all in a nice kit bag!

Digital snow thermometer. Measurement range from -40 °C to 200 °C / -40 °F to 392 °F. Can be switched between ° C and F°. With min/max function. Compact size (15 cm long).

Electronic precision edge grinder for tuning side edges quickly and professionally. It gives edges a World Cup finish. - Ergonomic design makes it very easy to use - Grinders simple to replace - Easily adjustable angle settings 85 to 90 degrees - Comes with Diamond Disc 5560053 - 110V for use in the USA

Performance racing paste wax for all snow types and conditions, fluoro free

For clean removal of wax residue from ski grooves.

Hard high performance liquid racing wax to meet the highest demands. Features: - For cold and aggressive snow conditions - Very long-lasting wax adhesion - Can also be used as adhesion promoter for top finish products - Fast processing - For brushing/polishing use the Polishing Brush Liquid Paraffin (5545251)

Medium hard high performance liquid racing wax to meet the highest demands. Features: - Wide application range for common conditions in the medium snow temperature range - Very long-lasting wax adhesion - Can also be used as adhesion promoter for top finish products - Fast processing - For brushing/polishing use the polishing brush liquid paraffin (5545251)

Soft high performance liquid racing wax to meet the highest demands. Features: - For high-moisture and wet snow conditions - Maximum water and dirt repulsion - Very long-lasting wax adhesion - Can also be used as adhesion promoter for top finish products - Fast processing - For brushing/polishing use the Polishing Brush Liquid Paraffin (5545251)

Foldable legs for cross country profile. - 1 pair

Practical plastic tool for removing wax residue in grooves on edges and sidewalls. With Klister edge.

Used as a base for other grip wax layers and increases abrasion resistance - Snow temperature: 0 °C to -30 °C - Air temperature: 10 °C to -30 °C - Volume: 27 g - Practical packaging: the wax can be twisted out like a glue stick

For use in hard wax conditions when classic skiing. Practical packaging: the wax can be twisted out like a deodorant stick enabling the waxer a good grip on the wax and the ability to use all of the product. - Yellow for snow temperatures 0C- -2C (32F-28F) - Red for snow temperatures -2C- -10C (28F-14F) - Blue for snow temperatures -7C- 30C (19F- -22F) - XCold for snow tempertures -12C- -30C (10F- -22F) - Base Green is a binder and makes what you put on it last longer. It can also be very good by itself in some conditions.

Highly effective GripSpray for fast/ clean/ and durable grip application with outstanding adhesion. - Base Green: Used as the foundation for other GripSprays (or other klisters or grip waxes) and greatly improves abrasion resistance and durability. - Universal: Universal klister formula

- Performance Hot Wax for racing and training/ fluorine free - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f)

Performance Hot Wax for racing and training, fluorine free. - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f)

Synthetic cork for corking Grip and Klister waxes.

Special extra soft polishing brush specifically designed for use with High Performance Liquid Waxes

Practical pump-up-sprayer to be refilled with Toko liquid products such as Wax Remover HC3, Universal Proof or Shoe Fresh.

Skiholder Belt for 16 Nordic skis/ length: 95 cm.

Gentle cleaning liquid for all types of bases. Removes wax residue especially of Top Finish products and prepares the base for waxing.

Base repair-stick for base damage. Just light it and drip the repair material onto the base.

Soft nylon brush for polishing bases. - 10mm long bristles

Roller brush for universal use in brushing out waxes. - 4mm long bristles

For brushing out hard and medium-hard paraffin waxes. - 6mm long bristles

For applying JetStream waxes.

Electronic precision tool for sharpening and planing Plexiscraper blades. Fits 3, 4, and 5mm scrapers.

Professional device for sharpening and smoothing plastic scraper blades. Suitable for 3, 4, 5 and 6 mm blade widths. Including 100 mm radial file. Can be screwed onto the table or a wooden board.

Simple/ very compact fixation device for cross-country skis (skating and classic). Secures with adjustable centre part directly on the binding. Compatible with all current binding models. Ideal for travelling.

Snow thermometer. Measuring range 97 °F to -33 °F. Precise measuring range for a snow temperature range of 32 °F to -4 °F. In practical pen format.

Steel blade for removing base material during structure and base repair.

Ergonomic Waxiron enables easy waxing in all directions. - Precise temperature adjustment from 100 °C to 160 °C. - The extra-strong aluminum pressure cast plate for ideal heat storage has a curved rhomboid structure that improves the distribution of the wax and compression.

Polishing cork for polishing rub-on/ paste or liquid wax. Perfect for working with 100 % fluorinated top finish products. With special felt material. Heated by friction.

Universal file with hard-chromed surface. Meets the highest demands of professional World Cup service technicians.

Fine file with hard-chromed surface. Meets the highest demands of professional World Cup service technicians.

Natural cork for corking Grip and Klister waxes and JetStream.

Hard high performance racing wax to meet the highest demands. The wax used by World Cup stars! Features: - For cold and aggressive snow conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

Soft high performance racing wax to meet the highest demands. The wax used by World Cup stars! features: - For high-moisture and wet snow conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

Protects the wax base during transport and is easy to prepare for the next training session. A versatile hard glide wax. Used by Racing Service and ski factories as a transport wax and as an effective preparation for the next summer snow training session. - Easy to apply with a waxing iron. - Easy to scrape and brush. - Fluoro-free

Practical and robust transport and storage cover for the T0075W waxing table. The cover is stitched in thick and robust material that both protects the table and surroundings during travel and storage. Sturdy carrying straps make it easier to transport the waxing table. - Easier to transport the table - Hard-wearing material

Great glide made easy! Great liquid glider, that is very durable. - Covering both sides of the freezing point - No iron needed - Fluor free Temperature range: -4°C to +4°C (25°F to 39°F). A liquid spray-on training wax that can be used alone or as an underlayer for racing waxes. CH08XL is an extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above freezing, and everything in between. Basically a must-have in conditions you will meet often. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Swix Cleaners - Lightly scented - Dearomatized hydrocarbons - Citrus based formula - Increased product shelf life

Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.

HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers. High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. About HS10L: A liquid training and racing wax that can be used alone or as a base for other glide products. HS10L is optimized for very wet conditions when the snow has been transformed. Ideal in spring for dirty snow conditions. A good choice that never underperforms in warm conditions. How to apply HS10L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. Features: - Fantastic for warm conditions - Improves ski glide - For training and racing - Fluoro-free and 100% biodegradable - Also available as hot wax - Thoroughly tested in different conditions

HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Details: - A popular wax in nordic disciplines - Good water repellent properties - Replaces LF10X - For training and competition Highlights: - For warm conditions - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS6L is especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. - HS6L is a versatile wax that works in all snow conditions, but performs at its best when the humidity is high. - Replaces the CH6XL. - -4°C to -12°C (25°F to 10°F).

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS7L performs at its best when typical winter conditions below the freezing point. - Can handle various snow conditions and is not humidity sensitive. - A safe choice that rarely underperforms within its core area of use. - Replaces the CH7XL. - -2°C to -8°C (28°F to 18°F).

HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS8L is an extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above freezing and everything between. Basically a must have in conditions you will meet often. - Replaces the CH8XL. - -4°C to +4°C (25°F to 39°F).

A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

Ski cleaner for cleaning ski bases and removing wax and klister. Spray on the base, remove as much wax as possible with a scraper and wipe with Fiberlene. The active ingredient in this ski cleaner is a low-aromatic hydrocarbon which has a good effect on grease and dirt. The aerosol has propellant gas that does not damage the ozone layer and the ski cleaner is less flammable and less environmentally harmful than most other ski cleaning products. Practically odorless. *Danger: Extremely flammable aerosol. Pressurized container: May burst if heated. May cause drowsiness or dizziness. Harmful to aquatic life with long-lasting effects. Repeated exposure may cause skin dryness or cracking.