Skip to main content

Filter By:

Mountain

Surly Karate Monkey Frameset
$700.00 - $749.00
The Karate Monkey frame features updated, progressive trail geometry, a new tubeset, and Surly’s Gnot-Boost rear dropout system to support multiple drivetrain and wheel size configurations. - 100% Surly 4130 chromoly steel frame and fork; double-butted main triangle and 44mm headtube - Tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing works with 142 x 12, 148 x 12mm, and 135mm w/ 10/12 washer - Internal dropper seatpost routing - 30.9mm seat tube ID - Clearance for 29 x 2.55 or 27.5 x 3 tires
Rocky Mountain Instinct Alloy 50
$3,799.00
Stable and aggressive, the Instinct is our most versatile trail bike. Whether you’re setting out on an all-day epic or pushing the limits of what’s possible on your local trails, the Instinct’s ride-quality is second to none. The combination of fast-rolling 29" wheels, modern trail geometry, and our RIDE-9 adjustment system means the Instinct is ready for anything you throw at it. - FORM Alloy frame - RockShox Pike Select RC 140mm fork - RockShox Deluxe Select+ RT shock - Shimano XT 12-speed drivetrain - WTB ST Light i30 Rims w/Maxxis Minion 2.4" tires - Race Face Aeffect R dropper post
Rocky Mountain Instinct Carbon 50
$4,749.00
Stable and aggressive, the Instinct is our most versatile trail bike. Whether you’re setting out on an all-day epic or pushing the limits of what’s possible on your local trails, the Instinct’s ride-quality is second to none. The combination of fast-rolling 29" wheels, modern trail geometry, and our RIDE-9 adjustment system means the Instinct is ready for anything you throw at it. - SMOOTHWALL Carbon Front Triangle, FORM Alloy Rear Triangle - Fox 36 Float EVOL GRIP Performance Series 140mm fork - Fox Float DPS EVOL Performance shock - Shimano SLX/XT 12-speed drivetrain - WTB ST Light i30 TCS Rims w/Maxxis Minion 2.4" tires - OneUp dropper post
Rocky Mountain Pipeline Carbon 50
$4,499.00
The Rocky Mountain Pipeline combines the confidence of plus-sized tires in raw, technical terrain with an aggressive trail chassis. RM pushed the rear travel to 140mm, increased stiffness, and adjusted the suspension kinematics for more efficient pedaling and better small-bump sensitivity. Available in both carbon and alloy models, the Pipeline plows through greasy roots and square-edged chunder with authority, while providing near limitless traction on rocky, slippery climbs. The Pipeline Carbon 50 version brings together a burly Smoothwall carbon frame, 140mm Fox 34 fork, DPS EVOL shock, and 27.5 x 2.8-inch Maxxis tires on Race Face AR 35 rims. That’s a combination that sets you up for success running steep, technical trail or shredding smooth-berm park runs. SRAM serves you with a GX Eagle 1x12 drivetrain that offers a massive range of gearing with smooth shifting to get you anywhere you want to go, while Shimano SLX brakes rein it in with sure-stopping power that won’t fade away. Rocky Mountain cockpit components and Fox Transfer dropper post round out the spec to make an almost too-fun trail bike that leaves behind big smiles everywhere it goes.
Rocky Mountain Thunderbolt Carbon 50
$4,599.00
The Thunderbolt is our vision of a perfect XC-trail bike. Quick and nimble, the Thunderbolt is total livewire. Whether it’s powering up technical climbs or popping off every trail feature in sight, its 27.5" wheels and 140mm of rear travel makes this bike ready and capable for when you’re feeling creative with line choice. Our RIDE-9 adjustment system gives you the power to further adjust geometry and ride characteristics to your liking. - SMOOTHWALL Carbon frame - Fox 34 Float Performance 140mm fork - Fox Float DPS EVOL Performance shock - Shimano SLX 12-speed drivetrain - WTB ST Light i30 rims w/Maxxis Minion 2.4" tires
Liv Tempt E+ 2 20MPH
$2,400.00
MORE THAN JUST A WAY TO GET AROUND, TEMPT E+ POWERS YOUR LIFE WITH THE FREEDOM TO FIND YOUR JOY. KEY PERFORMANCE FACTORS Accessible and Reliable An attractive price point gives you access to new trails and experiences thanks to the 200 km range of the ultra-reliable EnergyPak 500Whr and 160 km range of the EnergyPak 400Whr battery. Integrated Design The reliable and easy-to-access EnergyPak side-release battery is beautifully integrated into a lightweight and durable ALUXX-Grade aluminum frame, designed and tuned for women using Liv’s 3F Design Philosophy. Smooth Riding SyncDrive Core motor with 50Nm torque creates a natural yet powerful riding feel. WHY WE LOVE IT Tempt E+ is fully outfitted with 100 mm front suspension, hydraulic disc brakes, and plenty of power assist to get you up those hills with a smile on your face. Designed to match you with just the right wheel size for balance and maneuverability, XS and S frames come with 27.5-inch wheels, while M and L frames come with 29-inch wheels. The handlebar-mounted RideControl ONE lets you adjust riding modes, and it has key data indicators – battery level and support level. Tempt E+ gives you the power to choose from five levels of assistance, so you can control your speed, how hard you want to pedal, and extend the battery life. Built specifically for women in both frame geometry and contact points, along with an integrated battery and motor design, Tempt E+ provides a speedy power-assisted ride.
Giant XTC Advanced 29 3
$2,000.00
For pure XC speed, this composite hardtail 29er delivers responsive ride quality and maximum efficiency on fast, flowy singletrack. It’s a great choice for your weekly race series, an off-road marathon, or burning up your local XC trails. With its large-diameter 29-inch wheels and lightweight Advanced-grade composite frame, this smooth-riding hardtail eats up XC terrain. The frameset is engineered for a 100mm fork, and it’s handcrafted with a specific composite layup schedule that varies according to frame size to create the optimal stiffness-to-weight ratio with just the right amount of vertical compliance. The result is a bike that scoots up steep climbs and gives you added confidence and control on fast, flowy singletrack. It features wider Boost hub spacing, which improves wheel stiffness and adds clearance to run larger tires, plus a host of other features that let you dial in its performance for nearly any type of terrain. Lightweight and responsive A hand-crafted Advanced-grade composite frameset offers XC racers and riders a competitive advantage for climbing, accelerating, and sprinting. XC efficiency The frame is engineered with a high stiffness-to-weight-ratio, which translates to efficient pedaling power and precise handling on the trail. Custom compliance Each frame is custom-tuned based on its size. Individual composite lay-up schedules are created to optimize vertical compliance to produce a smoother ride quality on XC terrain.
Surly Big Fat Dummy
$3,025.00
The Big Fat Dummy is a long tail cargo bike that took a few too many doses of growth hormones. At first glance, you might say that Surly just put bigger tires on a Big Dummy. But if you said that, you'd actually be very wrong so just… don't. Think of Big Fat Dummy as more of a second or third cousin to Big Dummy rather than a brother. They share some of the same DNA and look sort of similar, but they're two very different bikes and really only interact when they both reach for the potato salad spoon at that family reunion that no one really wants to be at anyway. Now that that's out of the way, let's get down to the nitty gritty of what makes this hulking beast of a bike tick. Surly's goal with designing a cargo bike around fat tires was to create the most stable, stiff, and traction-laden ride possible while hauling a ton of stuff. Big Fat Dummy has a longer toptube and slacker headtube than its more svelt cousin giving it a nice, predictable, and stable ride. They also used thinner, lighter tubing to construct its cargo area so while it's an overall burlier bike, there's not much difference in weight. Big Fat Dummy accepts either 10mm or 12mm axles in the rear with a spacing of 190/197mm. That big ol' spacing equates to one thing: tire clearance for days. Big Fat Dummy maxes out at a massive 26 x 5.25" tire.* While that large of a tire provides the most traction and stability a bike can possibly offer, it's also a lot of rubber to push and might not be for everybody. Luckily, Big Fat Dummy is also a blast to ride with 3" tires too. It uses the same 100mm suspension-corrected fork as the Wednesday, meaning if you want to add a little squishy squishy to your ride, you can throw a Bluto on and let ‘er rip. If you intend to carry a passenger on your Big Fat Dummy, Surly requires use of their Dummy Rail Collars. These provide a secondary retention system for the rack, as well as stiffen the rack system. In addition, a stoker handlebar set up, found on tandem bicycles, is recommended as well. Make sure to check with seat post manufacturer for stoker handlebar compatibility. All Big Fat Dummy framesets and bikes ship with a Dummy deck, rails, bags, and the aforementioned Dummy Rail Collars so you can immediately start hauling cargo — human or otherwise. Big Fat Dummy is ready and willing to carry all sorts of crap — literally. It's already in use on an organic farm in Ecuador so it's likely that it's hauled some form of manure by now. *Using a 26 x 5.25" tire will cause some drivetrain limitations.
Surly Big Fat Dummy Frameset
$1,649.00 - $1,650.00
The Big Fat Dummy is a long tail cargo bike that took a few too many doses of growth hormones. At first glance, you might say that Surly just put bigger tires on a Big Dummy. But if you said that, you'd actually be very wrong so just… don't. Think of Big Fat Dummy as more of a second or third cousin to Big Dummy rather than a brother. They share some of the same DNA and look sort of similar, but they're two very different bikes and really only interact when they both reach for the potato salad spoon at that family reunion that no one really wants to be at anyway. Now that that's out of the way, let's get down to the nitty gritty of what makes this hulking beast of a bike tick. Surly's goal with designing a cargo bike around fat tires was to create the most stable, stiff, and traction-laden ride possible while hauling a ton of stuff. Big Fat Dummy has a longer toptube and slacker headtube than its more svelt cousin giving it a nice, predictable, and stable ride. They also used thinner, lighter tubing to construct its cargo area so while it's an overall burlier bike, there's not much difference in weight. Big Fat Dummy accepts either 10mm or 12mm axles in the rear with a spacing of 190/197mm. That big ‘ol spacing equates to one thing: tire clearance for days. Big Fat Dummy maxes out at a massive 26 x 5.25" tire.* While that large of a tire provides the most traction and stability a bike can possibly offer, it's also a lot of rubber to push and might not be for everybody. Luckily, Big Fat Dummy is also a blast to ride with 3" tires too. It uses the same 100mm suspension-corrected fork as the Wednesday, meaning if you want to add a little squishy-squishy to your ride, you can throw a Bluto on and let ‘er rip. If you intend to carry a passenger on your Big Fat Dummy, Surly requires use of their Dummy Rail Collars. These provide a secondary retention system for the rack, as well as stiffen the rack system. In addition, a stoker handlebar set up, found on tandem bicycles, is recommended as well. Make sure to check with seat post manufacturer for stoker handlebar compatibility. All Big Fat Dummy framesets and bikes ship with a Dummy deck, rails, bags, and the aforementioned Dummy Rail Collars so you can immediately start hauling cargo — human or otherwise. Big Fat Dummy is ready and willing to carry all sorts of crap — literally. It's already in use on an organic farm in Ecuador so it's likely that it's hauled some form of manure by now. *Using a 26 x 5.25" tire will cause some drivetrain limitations. For all the nuts and bolts of compatibility read Surly's blog on the subject.
Surly Karate Monkey Frameset
$749.00
Karate Monkey is a highly-versatile trail bike that plays the part of 29er and 27.5+ equally well. Multipurpose Hardtail Mountain Bike Karate Monkey delivers a resilient, lively ride on all sorts of gnarly terrain. Its frame is a highly-versatile canvas for whatever dirty masterpiece your brain cooks up. According to our computing machine (Thor) it can be set up in approximately 487 different configurations. Originally designed as a 29er (and the frame that helped spark the 29" wheel movement), the latest Karate Monkey is designed to perform just as admirably as a 27.5+ rig as well. This allows you to pick your poison — provided your poison is having a really great time while permanently donning a maniacal grin, of course. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension-corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed, though) - Clearance for 29 x 2.5 or 27.5 x 3 tires
Surly Lowside Frameset
$600.00
Lowside is the bike that gets you across town for a quick rip on singletrack, then over to the bar for a night out. Lowside is like the grownup version of the bike you rode when you were a kid and still had hopes and dreams and some semblance of ambition. It’s just as happy riding singletrack as it is parked outside your favorite drinking establishment. Lowside is a singlespeed. Singlespeeding has been a part of Surly’s DNA since day one when we launched the 1x1 Rat Ride. After a lot of Homie Fall Fests and more feats of strength than we can recall, we decided to discontinue it a couple years back. Lowside picks up right where the 1x1 left off. Some have dubbed the Lowside the ultimate pub cruiser. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 26 x 3 or 27.5 x 2.8 tires
Surly Lowside Frameset
$599.00
Lowside is the bike that gets you across town for a quick rip on singletrack, then over to the bar for a night out. It's your BMX bike all grown up. Lowside is like the grownup version of the bike you rode when you were a kid and still had hopes and dreams and some semblance of ambition. It’s just as happy riding singletrack as it is parked outside your favorite drinking establishment. Lowside is a single speed mountain bike. Singlespeeding has been a part of Surly’s DNA since day one when we launched the 1x1 Rat Ride. After a lot of Homie Fall Fests and more feats of strength than we can recall, we decided to discontinue it a couple years back. Lowside picks up right where the 1x1 left off. Some have dubbed the Lowside the ultimate pub cruiser. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed, though) - Spec'd in alternating years with 26 x 3.0 or 27.5 x 2.8 tires, the Lowside remains capable of running either option
Surly Lowside Frameset
$600.00
The Surly Lowside is the bike that gets you across town for a quick rip on singletrack, then over to the bar for a night out. It’s the bike you turn to when you’re not entirely sure what the night has in store. It’s the bike to grab when you want to have just as much fun riding to the trail as you do on the trail, itself. Singlespeeding is an integral part of Surly’s DNA, and the Lowside continues the tradition, by taking a simpler approach to trail riding. - 100% Surly 4130 chromoly frame, main triangle is double-butted; 1 1/8" threadless chromoly fork - Singlespeed "specific" (derailleur hanger: yes; Trip Guides: no) - Dropper post routing - Gnot-Boost rear spacing - Front and rear thru-axles - 26 x 3" or 27.5 x 2.8" tire clearance
Surly Pugsley Frameset
$675.00
The Surly Pugsley may be the original fat bike, but this one is far from the original. Previously a great all-around fat bike, the Pugsley has been redesigned to be an ideal off-road touring and exploration rig. Surly lengthened the chainstays 12mm for stability when loaded and so your heels float effortlessly past panniers. The tweaked rear rack mounts on the dropouts let you center your rack over the wheel, despite the offset rear triangle. Those dropouts will take a 142 x 12mm thru axle if that's your schtick, but can also be used with 135 x 10mmm QR hubs with Surly's Adapter Washers. Pugsley brings back the 135mm-spaced offset fork, so you can run a front wheel with a spare cog or freewheel as a bail-out option to swap with the rear if your internally-geared hub freezes up in neutral or you smash your derailleur having too much fun. A plethora of three-pack mounts give you gear-hauling options aplenty, so go wild with your build. - 100% Surly 4130 chromoly frame, main triangle is double-butted; 1-1/8" threadless brazed chromoly fork - Four sets of Three-Pack Mounts (two on the fork, two on the downtube), a water bottle mount on the seat tube, and front and rear rack mounts - 142 x 12mm rear dropout (or 135 x 10mm QR with Surly 10/12 Adapter Washers) with Rohloff torque arm slot - 135mm-spaced fork with 17.5mm offset for wheel swappability - 26 x 4.8" tire clearance in frame (with drivetrain restrictions), 26 x 4.3" tire clearance in fork
Surly Troll Frameset
$699.00
Off-road touring can be a zesty enterprise, but it’s not without its perils. Bicycles are simple machines that are extremely efficient, but all simple machines carry along with them the chance of breaking down. This efficiency can get you in trouble if your bike decides to break down far away from the comforts of your parent’s basement. If you’re going to ride your bicycles where no one can see, you better take gear that’s up to the task. Troll is up to the task. Our Troll was once a simple mountain bike frame with a few extras that made it nice for touring. The Troll has evolved into a frame that has been pushed deeper into the category of off-road touring. Its geometry is no longer suspension corrected, which gives it more room for a larger frame bag. We’ve also adorned this frame with our Gnot-Boost spacing, allowing you to use any mountain bike hub whether it be 135mm QR, 12 x 142mm thru-axle, or 12 x 148mm Boost hub. The chainstay yoke has been redesigned to be fully compatible with 26+ tires and the dropouts still allow you to run disc brakes, fenders, a Rohloff hub, and racks simultaneously. It also comes with more braze-ons than you thought possible – there are four triple bottle mounts on the fork alone (don’t get excited, you can only run one Anything Cage per fork leg), as well as two more triple bottle mounts on the down tube. Troll is a bike that has one purpose – and that purpose is to carry you as far away from society as possible. Man has known for eons the call of the indifferent forest. The inexorable march of time, and dumb crap like cell phones, have dulled our senses and made us afraid. Reclaim your animalistic tendencies atop Man’s greatest invention.
Surly Troll Frameset
$699.00
Off-road touring can be a zesty enterprise, but it’s not without its perils. Bicycles are simple machines that are extremely efficient, but all simple machines carry along with them the chance of breaking down. This efficiency can get you in trouble if your bike decides to break down far away from the comforts of your parent’s basement. If you’re going to ride your bicycles where no one can see, you better take gear that’s up to the task. Troll is up to the task. Surly's Troll was once a simple mountain bike frame with a few extras that made it nice for touring. The Troll has evolved into a frame that has been pushed deeper into the category of off-road touring. Its geometry is no longer suspension corrected, which gives it more room for a larger frame bag. The chainstay yoke has been redesigned to be fully compatible with 26+ tires and comes with the always-comfy Jones Loop bar. The dropouts still allow you to run disc brakes, fenders, a Rohloff hub, and racks simultaneously. It also comes with more braze-ons than you thought possible – there are four triple bottle mounts on the fork alone (don’t get excited, you can only run one Anything Cage per fork leg), as well as two more triple bottle mounts on the down tube. Troll is a bike that has one purpose – and that purpose is to carry you as far away from society as possible.
Surly Wednesday Frameset
$675.00
Wednesday is a great all-around fat bike that has the soul of a trail bike and mind of a touring bike Wednesday sits in the middle of our Trail category, but don't let that fool you into thinking that's its only use. With Wednesday, we borrowed elements from some of our Trail and Touring models to create a versatile fat bike that can truly handle anything you want to attempt. If you do an equal amount of off-road touring as you do hitting trails, Wednesday's ability to play both parts equally will suit you well. Or, if you're looking for a fat bike and don't need the fattest tires on the market, Wednesday's 26 x 4.6" tire clearance is just the ticket. Any day of the week's a great day to ride a Wednesday. - Modern mountain standards: stealth dropper post routing, 44mm headtube, suspension correction, front and rear thru-axles - Full suite of useful braze-ons: front and rear racks, multiple sets of three-pack mounts, fenders - Full-forward, short chainstay position: 26 x 3.8 tires on 80mm rims; full-rearward, longer chainstay position: 26 x 4.6 tires on an 80mm rim
Scott Contessa Ransom 910
$5,499.99
The Contessa Ransom. 170mm of trail munchin', climb crushing, stage winning all day pinning mountain biking excellence. The Contessa Ransom 910 comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset and Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX-Alloy Frame - FOX 36 Float Perf. Elite 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM GX Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 2.0 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros Parts
Scott Contessa Scale 910
$2,799.99
The SCOTT Scale 910 has geometry inspired by racing at the highest level, a Shimano XT 12-speed drivetrain, and Syncros components to give you a hard tail that is just itching to finish first. ICCR Cable Routing ICCR provides a clean look and a functional solution for all the different control cable standards on the market. Cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts We’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and lightweight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Axle Tool Working together with DT Swiss, we completely revisited the shape of the thru-axle lever to make it more ergonomic and to perfectly fit our frame. Additionally, we introduce a new multifunctional tool integrated into the inner part of the thru-axle itself. This 25T Torx wrench is easy to reach and ready to be used for quick adjustments on the trails. 29-Inch Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Scale Carbon HMF Frame - FOX 32 SC Performance 100mm Fork w/RideLoc 3-Position Remote - Shimano XT 12 Speed Drivetrain - Shimano XT Hydraulic Disc Brakes - Syncros Silverton 2.5 TR Wheels - WTB Ranger 29 x 2.25" Kevlar Tires
Scott Gambler 910
$5,999.99
The all NEW Gambler was designed for one thing and one thing only—pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. Taking years of racing development and mixing it with our carbon expertise, this bike is our answer to the needs of white-knuckle downhill racing. The Gambler, Simply Fast. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffnessand avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheels - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Gambler HMX Carbon-Alloy Frame - FOX 40 Performance Elite 203mm Fork - FOX DH X2 200mm Shock - SRAM GX DH 7 Speed - SRAM Code R disc brakes - Maxxis Assegai 2.5" DH Tires
Scott Gambler 920
$4,399.99
The all NEW Gambler was designed for one thing and one thing only—pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. The Gambler 920 is the lightweight alloy DH bike of your dreams, and it too is simply fast. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Gambler Alloy Frame - FOX 40 Performance Elite 203mm Fork - FOX VAN RC 200mm Shock - SRAM GX DH 7 Speed - Shimano 4 Piston disc brakes - Maxxis Assegai 2.5" DH Tires
Scott Gambler 930
$3,699.99
The all NEW Gambler was designed for one thing and one thing only—pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. The Gambler 930 is the lightweight alloy DH bike of your dreams, and it too is simply fast. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Gambler Alloy Frame - RS Boxxer Select 200mm Fork - X-Fusion Vector R 200mm Shock - SRAM X5 8-Speed - Shimano 4 Piston disc brakes - Maxxis Assegai 2.5" DH Tires
Scott Genius 900 Tuned AXS
$7,999.99
The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 900 Tuned features our TwinLoc Suspension System to always optimize your ride. With a SRAM Eagle AXS Wireless drivetrain and Syncros components, the Tuned is your go to for all day mountain trail huntin'. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffnessand avoids damage to the frame in case of impacts on the rear derailleur. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Genius Carbon HMX Frame - FOX 36 Float Factory 150mm Fork - FOX Nude TR EVOL, TwinLoc 150mm - SRAM X01 AXS Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke Carbon Wheels - Maxxis Kevlar Tires - FOX Dropper Post, Syncros CF Parts
Scott Genius 900 Ultimate AXS
$11,499.99
The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 900 Ultimate features a FOX Live Valve electronic suspension system, an SRAM XX1 AXS Wireless 12 speed Drivetrain and XTR brakes, alongside carbon wheels and components. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. Key Features - Genius Carbon HMX Frame - FOX 36 Float Live Valve 150mm Fork - FOX Float Live Valve EVOL, 150mm - SRAM XX1 AXS Eagle 12 Speed - Shimano XTR 4 Piston Disc Brakes - Syncros Revelstoke Carbon Wheels - Maxxis Kevlar Tires - FOX Dropper Post, Syncros CF Parts
Scott Genius 910
$4,999.99
The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 910 features our TwinLoc Suspension System to always optimize your ride. With a Shimano 12-speed drivetrain and Syncros components, the Genius 910 is action ready. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Genius Carbon HMF-Alloy Frame - FOX 36 Float Perf. Elite 150mm Fork - FOX Nude TR EVOL, TwinLoc, 150mm - Shimano XT 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 1.5 TR Wheels - Maxxis Kevlar Tires - FOX Dropper Post, Syncros Parts
Scott Genius eRide 900 Tuned
$7,499.99
The Genius eRIDE is a pedal-assist game changer. With the Shimano STEPS system and modern geometry, you can explore the mountains like you never have before. The TwinLoc system allows you to not only change compression dampening but also to change the spring curve, dynamically altering the geometry of the bike. This allows you to have the most efficient bike handling in any riding situation, which is even more valuable with the extra weight of an E-Bike. With the steps E-8000 series, Shimano delivers next-level component integration, connectivity, and performance. To meet MTB specific needs, the E-8000 series was designed with all day riding in mind. The Lithium-Ion battery has a 500WH capacity that can be charged up to 80% in only 2.5 hours. It features a low-profile drive system, specifically designed for mountain bikes, which improves both impact and vibration resistance. The compact design allows for shorter chain stays and more tire clearance, and its low weight substantially improves handling and ride feel. You can switch between 3 assist modes: ECO, TRAIL, and BOOST, using levers that were designed for mountain bikes to offer a similar feel to that of a gear shifter. The Genius eRide 900 features a lightweight aluminum frame with a tapered headtube, boost spacing, and internal routing. The Fox Float 36 with Kashima coating and Fox Nude TR Evol rear shock provide 150mm of trail-taming suspension. A Shimano XT STEPS crankset is paired with SRAM X01 Eagle rear derailleur and GX shifter, for an accurate and reliable 12-speed drivetrain. DT Swiss H1825 Spline wheels are light, stiff, and built for the extra demands of an e-MTB. They come mounted with a perfect combo of Schwalbe Magic Mary front and Hans Dampf rear tires. Completing the performance package, a Fox Transfer dropper post with Kashima coating increases this bike's aggressive abilities, while a 740mm Syncros carbon bar adds extra stiffness to the front end.
Scott Ransom 900 Tuned
$7,599.99
The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning, all-day-pinning mountain biking excellence. The Tuned version comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset, and high-end Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super-light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Ransom Carbon Construction While we always aim to have lightweight carbon bikes here at SCOTT, we never compromise frame strength when doing so. Taking into consideration the riding this bike is designed for, we have created our strongest carbon frame to date. Through clever layering and reinforcement in certain zones we obtain the stiffness wanted between the head tube and the rear wheel axle via a path following the downtube and the chainstays - we call this the stiffness backbone. The Ransom being a 1x only bike allowed us to optimize the width of the main pivot which is normally the weak point on this stiffness path. Additionally, the Trunnion mount on the DT close to the BB allows us to obtain great stiffness at the bottom of the bike and lightweight construction up top for compliance and for having the center of gravity as low as possible. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX Frame - FOX 36 Float Factory 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM X01 Eagle 12-Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 1.5 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros CF Parts
Scott Scale RC 900 World Cup AXS
$6,799.99
World Cup aspirations require a World Cup Quality ride. Lightweight, stiff, fast — this is what you can expect from the Scale RC 900 World Cup. With SRAM's new AXS Wireless shifting and carbon wizardry, the World Cup can help you go from Nino Schurter super fan to perhaps putting on the leader's jersey. The bike can make it there, can you? Only time will tell. ICCR Cable Routing ICCR provides a clean look and a functional solution for all the different control cable standards on the market. Cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts We’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and lightweight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Axle Tool Working together with DT Swiss, we completely revisited the shape of the thru-axle lever to make it more ergonomic and to perfectly fit our frame. Additionally, we introduce a new multifunctional tool integrated into the inner part of the thru-axle itself. This 25T Torx wrench is easy to reach and ready to be used for quick adjustments on the trails. 29-Inch Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Scale RC Carbon HMX Frame - RockShox SID Ultimate RLC3 100mm Fork - SRAM XX1/X01 AXS Eagle 12 Speed Drivetrain - SRAM Level TLM Hydraulic Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - WTB Ranger 29 x 2.25" Kevlar Tires - Syncros Carbon Components
Scott Spark RC 900 Pro
$5,199.99
Anyone who ever dreamed of a pro cross-country racing career has dreamed of the Spark RC 900 Pro. The 1x-specific Spark RC frame design and lightweight, hyper-efficient TwinLoc Suspension System are made for pure, on-course performance. The Pro build includes a Shimano XTR 12-speed drivetrain and XTR brakes, and is made to go the distance with premium Syncros components completing this race-worthy package in style. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Asymmetric Design - The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibers achieve their full potential when used in smooth straight lines. Off-setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, 100mm, TwinLoc - Shimano XTR 12 Speed - Shimano XTR Disc Brakes - Syncros Silverton 1.5 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts
Scott Spark RC 900 SL AXS
$11,999.99
Having already written itself into the history books, the Spark platform has been revamped, and is faster and fitter than ever. With the lightest frame in the RC series, the SL version comes equipped with a FOX 32 SC Fork, a SRAM Eagle AXS 12-speed wireless drivetrain, and a host of Syncros carbon components that will make any rider feel like they can go toe to toe with the world's finest. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Key Features - Spark RC Carbon HMX SL 1799g Frame - FOX 32 SC Float Factory 100mm Fork - FOX Nude EVOL, 100mm, TwinLoc - SRAM XX1 AXS Eagle 12 Speed - Shimano XTR Disc Brakes - Syncros Silverton 1.0 SL CF Wheels - Maxxis Rekon Race Kevlar Tires - Syncros SL Carbon Parts
Page 1 of 2 Next page