Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Handlebars

Surly Open Bar Handlebar
$55.00
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
Sunlite Alloy Swedged MTB Handlebar
$15.99
• Lightweight aluminum construction • Back sweep: 6 degrees
Sunlite MTB/City Handlebar (Aluminum)
Lightweight aluminum construction with a versatile riser bar design.
Race Face Aeffect Handlebar
$48.99 - $49.99
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°
Race Face Atlas 35 Riser Handlebar
$84.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
Race Face Turbine R 35 Handlebar
$89.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color
Origin8 Bullhorn II
$24.99
- Pursuit style Bullhorn handlebar - 6061-T6 Tubular alloy construction - Textured grip surface - 19.7 mm Inner diameter for bar end brake/shift - EN Road Safety Certification
Origin8 Pro Pulsion Bull Horn Handlebar - 31.8mm
$39.95
Origin-8's Pro Pulsion Bull Horn Handlebar is crafted from lightweight 6061-T6 aluminum. It features a great bullhorn shape that works great for fixed gear and city bikes. And, it comes in a bevy of colors to add pop to your ride.
Zipp Service Course 70 Ergo
$55.00
On today’s road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 Ergo handlebar. The Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you’d want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you’ll love. - Distinctive silver finish - 6061 aluminum for low weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - ISO 4210 compliant
Zipp Service Course 70 XPLR
$55.00
On today’s road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar’s moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today’s riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare. - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. - Distinctive silver finish - Reach: 70mm - Drop: 115mm
Zipp Service Course SL-80 Handlebars
$110.00
Zipp’s Service Course SL-80 bars keep the drops close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
Zipp Vuka Aero
$900.00
Zipp’s Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features market-leading adjustability; it can be used with any stem to help you find your ideal position on the bike. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that’s stiff and streamlined while maintaining the UCI’s 3:1 aspect ratio requirement. - Market-leading adjustability in pad fore-aft, width, height, and angle - Integrated Carbon Aerobar works with any 31.8mm clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately
Whisky Parts Co. No. 7 12F Drop Bar
$78.00 - $80.00
Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
Whisky Parts Co. No. 7 24f Drop Bar
$78.00
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
Whisky Parts Co. No. 9 Flat Bar
$145.00
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Whisky Parts Co. No.7 6F Alloy Drop Bar
$78.00 - $80.00
The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.
Whisky Parts Co. Winston Bar
$200.00
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds. - Compatible with road, mountain, and bar-end controls - Tested to ASTM 3 - 90mm clamping area to fit Salsa Anything Cradle - Can be ridden in up or down position - Unidirectional carbon fiber construction - Weight: 250g
Velo Orange Porteur Handlebar
$35.00
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
TruVativ Noir T30 Flatbar
$156.00
TruVativ's Noir T30 Flatbar is made from TruVativ's unidirectional SL high-modulus carbon for ultra light weight and superb strength. Plus, the wide, flat profile of the bar puts you in an aggressive position perfect for short-travel bikes and it's bar-end compatible, too.
Thomson Carbon Road Handlebars
$249.95
Thomson's Carbon Road Handlebars are as light, stiff and strong as they are beautiful. Thomson crafts them of three types of unidirectional Toray carbon, molding them in one piece and putting a mild wing shape on top for a nice platform and support for your hands. And you get the perfect bend for riding in all hand positions with plenty of clearance for your wrists at any bar angle. Plus, there are provisions on the bottom for the cables so you get a tidy tape job and even more comfort.
Surly Sunrise Handlebars
$65.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black
Surly Terminal Handlebar
$80.00
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise
Surly Truck Stop Handlebar
$65.00
Designed to combine what’s good about drop bars with the benefits of a riser, the Truck Stop Bar offers welcome relief to the road-weary traveler. Just like with a standard drop bar, you’ll have multiple hand positions at your disposal so you can stay comfortable and in control for the long haul down the Big Slab. And if it’s a more relaxed, upright riding position you’re after, 30mm of rise will get you there. So, if you’ve accidentally or intentionally cut your steer tube too short, here’s your chance at redemption. Also suitable for taller riders who’ve exhausted all other options for rise, it comes in three widths of 42, 45, and 48cm. Lightweight aluminum construction, CB radio not included. Specifications: - Material: Aluminum - Clamp Diameter: 31.8mm - Width: 42cm, 45cm, or 48cm - Rise: 30mm - Sweep Angle: 12 degrees - Color: E.D. coated black
Spank Spike 800 Race Bar
$79.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
Spank Spike 800 Vibrocore Bar
$99.90
- DH Race tuned award winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - KEY TECHNOLOGIES: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - MATERIAL: MGR Super 6 Alloy - WEIGHT (g): ±340 (15mm) / ± 350 (30mm) / ±360 (50mm) - DIAMETER (mm): 31,8 - RISE (mm): 15 / 30 / 50 - LENGTH (mm): 800 (adjustable to 740) - GEOMETRY (deg°): 4° up x 8° back - FINISH: Shot peen anodized, decal logos
Ritchey Classic EvoCurve Drop Handlebar
$46.95
Ritchey Classic components are high-polished silver to accentuate a special build that requires a classy touch. EvoCurve is a short and shallow compact drop bar with an oversized comfortable top section. - 6061 aluminum - Width measured at the hood - Bar Clamp Diameter: 31.8mm - Bar Drop: 130mm - Bar Reach: 80mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Compact - Cable Routing: External - Clip-on Compatible: Yes - Flare: 4
Ritchey Classic Venturemax Handlebar
$47.95
Tom Ritchey has been riding off-road and riding far—and designing products for such adventures—decades before anyone thought to call it "gravel riding" or "bikepacking." His real-life experiences directly inform every product made by Ritchey—such as the beloved VentureMax handlebar. With its short reach, shallow drop, and purposeful flare, the original VentureMax offers comfort and confidence to legions of riders looking to settle in and have some fun on those dirty drop bar adventures. Like the original, the Classic VentureMax is influenced by those life experiences, with some added new features—continuing to inspire riders to chase gravel and other mixed-surface adventures. Adding a touch of stylish sophistication with its high-polish silver finish, the Classic VentureMax features aero-shaped 38x22.5mm ergonomic tops for a more comfortable hand position, while drilling for a Shimano EW-RS910 junction box expands the adaptability of the WCS VentureMax. Multiple hand positions are key for comfort and confidence on any ride, and the Classic VentureMax offers plenty of options there—especially with its wide 24-degree flare at the drops. But it's the return of the Bio-bend in the drop that adds yet another design element that is practical and comfortable for whatever surface you choose to ride upon and for however long your adventure endures. - Material: double-butted 6061 alloy - Bend style: Ergo Bio-Bend - Top style: round - Width: 400mm, 420mm, 440mm, 460mm - Drop: 102mm - Reach: 76mm - Drop flare: 24° - Flare out: 6° - Back sweep: 6° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Clip-On compatibility: limited - Other features: C260 compatible - Weight: 310g (420mm)
Ritchey Comp Butano Drop Handlebar
$42.95
The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. Butano is a short and shallow compact flared drop bar. - 6061 aluminum - Clip-on compatible - Bar Clamp Diameter: 31.8mm - Bar Drop: 118mm - Bar Reach: 73mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Compact - Cable Routing: External - Clip-on Compatible: Yes - Flare: 12
Ritchey Comp Curve Road Handlebar
$33.95
The Richey Comp Curve Road Handlebar features a short reach, shallow drop and a smooth double radius drop section. - Double butted 6061 aluminum - Aero bar compatible - Bar Clamp Diameter: 31.8mm - Bar Drop: 128mm - Bar Reach: 73mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Compact - Cable Routing: External - Clip-on Compatible: Yes - Flare: 0
Ritchey Comp VentureMax
$42.95
The Ritchey Comp VentureMax Road Handlebar is just as applicable on a cross country tour as on cross country singletrack. Intended to ride wider than typical drop bars, the VentureMax is measured at the initial bend rather than at the hood. While it boasts a number of attributes including multiple hand positions, it’s the return of the Bio-bend in the drop that adds to the signature look and feel of this bar. - Compatible with all hood types - Evo sweep of 6 degrees - Bar Clamp Diameter: 31.8mm - Bar Drop: 102mm - Bar Reach: 76mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Anatomic - Cable Routing: External - Material: Aluminum - Clip-on Compatible: Yes - Flare: 24
Page 1 of 3 Next page