Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Brakes/Levers/Pads

$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$19.99 - $27.00 $19.99 - $27.00 Up to 9% Off
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$179.99
Whether you like ripping big descents or going out for epic XC adventures, Avid's Elixir 7 Hydraulic Disc Brake is for you. Avid's Taperbore technology and Power Reserve Geometry deliver great modulation and pinpoint stops. Increased power comes courtesy of a super-stiff, 2-piece caliper that contains larger pistons and DOT 5.1 fluid for better heat dissipation and resistance to brake fade. Plus, the Elixir boasts a unique integrated reservoir and a carbon lever for major weight reduction and a sleek look, while a tool-less reach adjust lets you dial in the perfect feel. The Elixir 7 even comes complete with Avid's HS1 rotor.
$12.99
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
$9.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$6.00
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
$38.00
The BB5 offers our Tri-Align Caliper Positioning System, tool-free pad replacement, a melt-forged body and an inboard pad adjustment knob. One try and you'll wonder if the BB5's are really entry-level brakes. - Mechanical simplicity
$38.00
Bring the power and performance of disc brakes to your drop bar bike. - Road-specific. - Mechanical simplicity.
$61.00
With gobs of beautifully modulated power and intuitive easy-to-use adjustability, the BB7s set the standard in the realm of mechanical disc brakes. Inboard and outboard adjustor knobs, Tri-Align Caliper Positioning System, and integrated cable stop spring tension adjustment ensures that our standard is everyone else's goal. - Mechanical simplicity - Adjustability
$61.00
Smooth, powerful braking performance that's simple to set up and easy to adjust. Bad weather or rough roads? Not even a factor with BB7's reliable mechanical performance. Compatible RED, Force, Rival and Apex levers. - Road-specific - Mechanical simplicity - Adjustability
$14.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$27.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$62.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$49.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
$71.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.
$37.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$19.00
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
$47.00
For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.
Page 1 of 1