Tools & Tuning

Electronic precision edge grinder for tuning side edges quickly and professionally. It gives edges a World Cup finish. - Ergonomic design makes it very easy to use - Grinders simple to replace - Easily adjustable angle settings 85 to 90 degrees - Comes with Diamond Disc 5560053 - 110V for use in the USA

TS10B - Top Speed 10 black. Great dirt resistance! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS10B is made harder than the std. TS10, as the adjusted hardness makes the wax more durable and absorbs less dirt. The solid lubricant additive reduces the friction in contaminated snow. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. TS10B can be used as race wax alone, but is often used as a base for top coats. Recommended iron temp: 165°C (329°F). Replaces the HF10BWX

TS5B - Top Speed 5 Black. Excellent dry-friction properties! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. The 5 series is the hardest wax in the TSB line, and is a great choice in cold conditions, both for alpine and cross country. It is loved by servicemen, due to its great durability and properties when the snow is dirty. This is achieved thanks to the black solid lubricant additive that also reduces friction when very cold snow. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. TS5B can be used as a race wax alone or as a base for top coats. Recommended iron temp.: 160°C (320°F)

TS8 - Top Speed 8 red. Great dirt resistance! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS8B is made harder than the std TS8. The adjusted hardness makes the wax more durable and absorbs less dirt. The solid lubricant additive reduces the friction in contaminated snow. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. TS8B can be used as race wax alone but is often used as a base for top coats. Recommended iron temp: 150°C (302°F).

Solid vise for wide skis up to 155 mm. The center piece is placed 30 mm further out from the workbench, compared to the other vises, to achieve better support. Supports for front and rear of the ski that are fastened with screws. Adapted for jump skis and freeride skis. - World Cup vise - For jump skis and freeride skis - For all skiing enthusiasts - Solid and stable

Quality, easy to adjust waxing profile. Same profile in front and back. Lightweight aluminium. Front and back part are both adjustable. Fixation in binding. Takes both classic and skating skis from 140 cm to 210 cm. Fits to T0079-1 legs or T0790-K clamps. Weight: 3 kg/6.6 lbs. Length of main stem approx. 1,61 meters.

Electronic precision tool for sharpening and planing Plexiscraper blades. Fits 3, 4, and 5mm scrapers.

The Rossignol Hero Ski Bag is a heavy-duty travel bag built with the World Cup travel circuit in mind. The bag accommodates two to three pairs of alpine skis or up to four pairs of Nordic skis. It's made of rugged ripstop polyester with a waterproof coating to keep your gear dry in all weather. Compression straps stabilize the load. A full-length zipper makes for easy access to skis. It fits skis up to 220cm in length. Heavy-Duty Durability Durable 600-denier polyester is coated for waterproof protection Adjustable Length Bag length adjusts from 190-220cm WATER-RESISTANT Our WATER RESISTANT products are coated with a repellent treatment to increase moisture management. ABRASION & TEAR RESISTANT Made of strong RIPSTOP fabrics, that avoid tear & abrasion that may cause premature wear.

Simple/ very compact fixation device for cross-country skis (skating and classic). Secures with adjustable centre part directly on the binding. Compatible with all current binding models. Ideal for travelling.

Waxing profile for when you are traveling. For prepping cross-country skis. - Travel profile - For cross-country skis - For skiers on the go - Takes up minimal space

HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Details: - A popular wax in nordic disciplines - Good water repellent properties - Replaces LF10X - For training and competition Highlights: - For warm conditions - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).

HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

The UR range is a range of fluoro-free glide wax for training and racing. - A hard glide wax - For cold conditions - For those who want a better skiing experience - High durability

The UR range is a range of fluoro-free glide wax for training and racing. - A soft glide wax - For conditions around 0 degrees - For those who want a better skiing experience - High durability

Foldable legs for cross country profile. - 1 pair

Digital Snow Thermometer with short probe (75 mm), accuracy ±0.8°C, water-proof, measures per second, ON-/OFF switch, reversible °C/°F, in plastic case, with clip, battery enclosed. Made for: Base Preparation

The easiest way to achieve great glide in warm and wet conditions. Recommended at temperatures from +2°C to +10 degrees. - Durable glide wax for 0°C and warmer conditions. - Excellent as both a topping and as a base wax - Ensures a smooth glide in warm conditions - This glide wax was recommended during the 2021 World Ski Championships

A liquid topping designed for racing use. Specifically designed for cold conditions, down to -12°C. TS06L is a versatile wax that works well in all snow conditions, but is at its best when humidity is high. Hold the bottle 10-15 cm above the ski base and spray on a thin layer. To even out the product and remove excess liquid, we recommend brushing with a felt cork (T0021) immediately after application. Then allow the product to dry and polish with a nylon brush. For better wear resistance, we recommend rubbing in the product using Roto fleece (T0018F-2) after it has dried and then polish it with a nylon brush. - Liquid yet durable - Excellent as a topping base - Gives excellent glide in cold conditions - Swix’s TS-series liquid glide wax was recommended during the 2021 World Ski Championships

The easiest way to achieve good glide for racing or training. Recommended at temperatures from -2°C to -8 degrees. - Liquid yet durable - Excellent as a topping base - Gives good glide in varied conditions - Swix’s TS-series liquid glide wax was recommended during the 2021 World Ski Championships

TS10B is harder than the other T10’ products of the PRO system. The extra hardness makes the wax more robust and so absorbs less dirt. The black additive reduces friction in polluted snow. This is particularly noticeable when the wax is used alone. The wax has very good test results on artificial snow and snow transformed into old natural snow. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. TS10B can be used as a racing wax alone, but is also often used as a base wax for other racing products. Recommended waxing iron temperature 165°C. - Liquid yet durable - Excellent as a topping base - Ensures a smooth glide in warm conditions - Swix’s TS-series liquid glide wax was recommended during the 2021 World Ski Championships

Designed specifically for longer distances on newer and clean snow. Excellent in warm conditions, but also very competitive at lower temperatures. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C.

TS7B - Top Speed 7 Black. A great racing wax for typical winter conditions! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS7B is a versatile wax suited for normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. The solid lubricant additive reduces the friction in cold conditions and in contaminated snow. It’s a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural, transformed older snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. TS7B can be used as race wax alone but is often used as base for top coats. Recommended iron temp: 150°C (302°F).

TSP10 is a great powder in wet conditions, typically when new or transformed snow are turning wet. Despite being a quite soft powder, the durability is great, and the powder can easily hold up for longer distances. The speed of the iron should be approx. 8-10 sec. on a skating ski. Important to have a good iron to get an efficient melting of the powder. TSP10 can be used as a race powder alone, but is often used as base for top coats. Recommended iron temp.: 160°C (320°F). - Powder for competition - Durable - For warm conditions - Pro by Swix ski wax - Fluoro free - Swix powder

TSP8 has a softness and racing formula that makes it perfect in conditions on both sides of the freezing point. The speed of the iron should be approx. 8-10 sec. on a skating ski. It's important to have a good iron to get an efficient melting of the powder. TSP8 can be used as a race powder alone, but is often used as a base for top coats. Recommended iron temp.: 160°C (320°F). - A favorite in nordic disiplines - Perfect underlayer for top coats - Replaces HF8X - Fluoro Free

The Marathon powder is the powder version of the well-known Maraton DHBFF glide wax. Applying the powder is much easier than applying the marathon hard wax, as the powder melts more easily and is easier to scrape off. The abrasion resistance of the product is the same. The grain size of the powder has been thoroughly tested to achieve the best application result and performance for the product. DHP-Black is specially developed for wet conditions and dirty snow. The black additive helps reduce friction and reduces the amount of dirt that sticks to the base. As well as excelling in wet conditions, this powder is highly competitive even in colder weather. Apply a good layer of powder onto the base, then run the iron over twice to ensure all the powder melts. The temperature of the waxing iron should be 160 degrees, and the speed of the iron should be about 5 to 7 seconds over the entire length of the ski. After cooling, scrape off the product using a plexi scraper and then brush with a steel or bronze brush, and finally polish using the blue nylon brush. - A favorite for classic long-distance races like the Birkebeiner - Powder version of the acclaimed marathon wax - The powder makes it easier to achieve an excellent result

Hard high performance liquid racing wax to meet the highest demands. Features: - For cold and aggressive snow conditions - Very long-lasting wax adhesion - Can also be used as adhesion promoter for top finish products - Fast processing - For brushing/polishing use the Polishing Brush Liquid Paraffin (5545251)

Medium hard high performance liquid racing wax to meet the highest demands. Features: - Wide application range for common conditions in the medium snow temperature range - Very long-lasting wax adhesion - Can also be used as adhesion promoter for top finish products - Fast processing - For brushing/polishing use the polishing brush liquid paraffin (5545251)

Soft high performance liquid racing wax to meet the highest demands. Features: - For high-moisture and wet snow conditions - Maximum water and dirt repulsion - Very long-lasting wax adhesion - Can also be used as adhesion promoter for top finish products - Fast processing - For brushing/polishing use the Polishing Brush Liquid Paraffin (5545251)

Tough and durable ski pole bag with reinforced sides to help stop poles being squashed in transit. Holds up to two pairs of Nordic poles. - PVC inner pipe for protection and durability - 3/4 zip lid at top with inside pocket to hold tips - Detachable padded shoulder straps - Holds two pairs of Nordic poles

Ergonomic Waxiron enables easy waxing in all directions. - Precise temperature adjustment from 100 °C to 160 °C. - The extra-strong aluminum pressure cast plate for ideal heat storage has a curved rhomboid structure that improves the distribution of the wax and compression.

World Cup file guide with integrated clamp, 88° - Tool for side edges - For filing steel edges - For enthusiasts and professional waxers - Extremely precise

For applying JetStream waxes.

Soft nylon brush for polishing bases. - 10mm long bristles

Roller brush for universal use in brushing out waxes. - 4mm long bristles

For brushing out hard and medium-hard paraffin waxes. - 6mm long bristles

Hard high performance racing wax to meet the highest demands. The wax used by World Cup stars! Features: - For cold and aggressive snow conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

Soft high performance racing wax to meet the highest demands. The wax used by World Cup stars! features: - For high-moisture and wet snow conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

Adjustable file guide from 0.5° to 2.0°. - Adjustable racing file guide 0.5° to 2.0° - Easy to adjust the angle - For skiers and service personnel. - Robust design.

Practical and robust transport and storage cover for the T0075W waxing table. The cover is stitched in thick and robust material that both protects the table and surroundings during travel and storage. Sturdy carrying straps make it easier to transport the waxing table. - Easier to transport the table - Hard-wearing material

Professional device for sharpening and smoothing plastic scraper blades. Suitable for 3, 4, 5 and 6 mm blade widths. Including 100 mm radial file. Can be screwed onto the table or a wooden board.

120g Base Performance Yellow/ Red/ and Blue/ a nylon brush/ and a 3mm plexiscraper all in a nice kit bag!

This fine horse-hair brush is perfect for brushing even the finest structures.

Professional all-round brush for brushing all kinds of hot wax. Ideal for brushing ironed-in Jetstream.

- Performance Hot Wax for racing and training/ fluorine free - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f)

Flexible waxing case, empty. Universal wax box, empty, with foam inside. For Nordic and Alpine. 40 cm x 31 cm x 8 cm.

Digital snow thermometer. Measurement range from -40 °C to 200 °C / -40 °F to 392 °F. Can be switched between ° C and F°. With min/max function. Compact size (15 cm long).

Base edge file guide, made of aluminum, 0.5°. - File guide - For filing base edges - For alpine skiers and snowboarders - Precise

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers. High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. About HS10L: A liquid training and racing wax that can be used alone or as a base for other glide products. HS10L is optimized for very wet conditions when the snow has been transformed. Ideal in spring for dirty snow conditions. A good choice that never underperforms in warm conditions. How to apply HS10L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. Features: - Fantastic for warm conditions - Improves ski glide - For training and racing - Fluoro-free and 100% biodegradable - Also available as hot wax - Thoroughly tested in different conditions

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS6L is especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. - HS6L is a versatile wax that works in all snow conditions, but performs at its best when the humidity is high. - Replaces the CH6XL. - -4°C to -12°C (25°F to 10°F).

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS7L performs at its best when typical winter conditions below the freezing point. - Can handle various snow conditions and is not humidity sensitive. - A safe choice that rarely underperforms within its core area of use. - Replaces the CH7XL. - -2°C to -8°C (28°F to 18°F).

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS8L is an extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above freezing and everything between. Basically a must have in conditions you will meet often. - Replaces the CH8XL. - -4°C to +4°C (25°F to 39°F).

A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).

Extreme durability! A great powder for extra cold conditions, that has high durability on aggressive snow and excellent dry friction properties. - Perfect on cold man-made snow - Easier to apply than corresponding cold waxes PSP is a special powder wax to add to other waxes to increase their durability, and to protect the base from ice abrasion. For especially abrasive snow, such as newly man-made snow, apply the wax of choice and then iron. While the wax is still in liquid form, or at least still warm, sprinkle the PSP powder over the wax. Even a generous amount will not affect glide. Then iron the powder into the wax layer. Allow cooling, then scrape and brush away the excess. Recommended iron temp: 150°C (302°F). Replaces the CH3X.

Superb in changing conditions! Klister for competition and training. - Racing klister - Temperature range -3°C to +5°C - For competitive athletes - Superior klister in changing conditions KN44 Nero klister can handle changing snow conditions very well and it has great anti-icing properties. Temperature range -3°C to +5°C (27°F to 41°F). SWIX Nero are revolutionary klisters with a black ingredient that has shown an impressive performance. They collect significantly less dirt from the snow than traditionally klisters. They are durable and stay better within the kick-zone than other klisters. NERO provides a secure kick over longer time than traditional klisters, due to their special characteristics.

Sturdy race file guide, 85° - Tool for side edges - For filing steel edges - For alpine skiers and snowboarders - Extremely precise